Crown FM 30 Stereo Transmitter

USD $3,901.10

Classic CROWN FM Transmitter Line – FM Low Power Transmitters.  The FM30 is available in three configurations:  The “T” is a perfect choice for the lower-power broadcaster, with its built-in audio processor and stereo generator.

SKU: RF-CROWN-FM30T Category:

Classic CROWN FM Low Power Transmitters.  The FM30T is a perfect choice for the lower-power broadcaster, with its built-in audio processor and stereo generator.

  • Frequency agile from front panel
  • SWR metering from remote control
  • Ability to control output power from remote control
  • 3-year warranty 24-hour service support
  • Meets or exceeds all FCC\ ISED requirements
  • TAC 2335-532-121

Technical Specifications

  • Frequency Range : 87 to 108MHz (Japanese frequency available 74-90MHz as an option) Front panel agile
  • RF Power : 3 to 30 watts with front panel adjustment
  • RF Output Impedance : 50 Ohms unbalanced
  • VSWR : 1.7:1 Maximum with automatic foldback at higher VSWR
  • Frequency Stability : Better than +/- 1KHz over operating temperature range
  • Modulation Type : Direct Frequency Modulation of Carrier
  • Modulation Indication : LED Indicators with Peak indicators
  • FM S/N Ratio (FM noise) : Better than 60 dB (70 to 80 dB typical)
  • Asynchronous AM S/N Ratio : Better than 50 dB referenced to 100% modulation @ 100 Hz, no de-emphasis.
  • Synchronous AM S/N Ratio : Better than 50 dB with 100% modulation @ 100 Hz, no de-emphasis (typical >60dB)
  • RF Harmonics/Spurious Products : Better than –65 dB (75 dB typical)
  • RF Bandwidth : +/- 120 KHz, better than –35 dB; +/- 240 KHz better than –45 dB
  • Temperature : 0 to 50 degrees C
  • Humidity : 0 to 80% @ 20 degrees C (non-condensing)
  • Maximum Altitude : 10,000 ft (3,000 m)
  • AC power : 100 to 120 or 220 to 240 volts AC +/- 10%, 50 to 60 Hz
  • Power factor : Greater than 97% (lagging)
  • DC Power : 36 to 48 VDC (48V required for full output)
  • Power Consumption : 100VA
  • Regulatory Notification for FCC part 73 and 74 : Meets FCC requirements
  • RF Output connector : Standard type N, 50 Ohm
  • Chassis dimensions : 5.25 x 16.5 x 17.5 inches (13.4 x 41.9 x 44.5 cm) exclusive of rack mounts but inclusive of connectors
  • Weight : 25 pounds (11.3 Kg) shipping weight = 33 Pounds (14.9 Kg)

Additional information

Weight 14.9 kg
Dimensions 44.5 × 41.9 × 13.4 cm