Classic CROWN FM Low Power Transmitters. The FM30T is a perfect choice for the lower-power broadcaster, with its built-in audio processor and stereo generator.
- Frequency agile from front panel
- SWR metering from remote control
- Ability to control output power from remote control
- 3-year warranty 24-hour service support
- Meets or exceeds all FCC\ ISED requirements
- TAC 2335-532-121
Technical Specifications
- Frequency Range : 87 to 108MHz (Japanese frequency available 74-90MHz as an option) Front panel agile
- RF Power : 3 to 30 watts with front panel adjustment
- RF Output Impedance : 50 Ohms unbalanced
- VSWR : 1.7:1 Maximum with automatic foldback at higher VSWR
- Frequency Stability : Better than +/- 1KHz over operating temperature range
- Modulation Type : Direct Frequency Modulation of Carrier
- Modulation Indication : LED Indicators with Peak indicators
- FM S/N Ratio (FM noise) : Better than 60 dB (70 to 80 dB typical)
- Asynchronous AM S/N Ratio : Better than 50 dB referenced to 100% modulation @ 100 Hz, no de-emphasis.
- Synchronous AM S/N Ratio : Better than 50 dB with 100% modulation @ 100 Hz, no de-emphasis (typical >60dB)
- RF Harmonics/Spurious Products : Better than –65 dB (75 dB typical)
- RF Bandwidth : +/- 120 KHz, better than –35 dB; +/- 240 KHz better than –45 dB
- Temperature : 0 to 50 degrees C
- Humidity : 0 to 80% @ 20 degrees C (non-condensing)
- Maximum Altitude : 10,000 ft (3,000 m)
- AC power : 100 to 120 or 220 to 240 volts AC +/- 10%, 50 to 60 Hz
- Power factor : Greater than 97% (lagging)
- DC Power : 36 to 48 VDC (48V required for full output)
- Power Consumption : 100VA
- Regulatory Notification for FCC part 73 and 74 : Meets FCC requirements
- RF Output connector : Standard type N, 50 Ohm
- Chassis dimensions : 5.25 x 16.5 x 17.5 inches (13.4 x 41.9 x 44.5 cm) exclusive of rack mounts but inclusive of connectors
- Weight : 25 pounds (11.3 Kg) shipping weight = 33 Pounds (14.9 Kg)
